Upcoming

013

A little teaser for a couple of things to come over the next week or so.  Things got a little busy for everyone, then the weather hampered outside range testing.

Pictured for upcoming testing is the KRISS Vector and the excellent HighCom Security  active shooters kit plate carrier and two level 4 stand alone plates inside.

Accuracy testing for the Vector will hopefully be done this weekend for a review to be posted early next week.

 

Our Favorite Gun Blogs PT 1

We don’t  often speak about other blogs  here.  One reason for that is that more than a few of the bigger names have stolen some of our posts and re-posted word for word our content.  But there are a few that are outstanding in my opinion, and one in particular that is so good that is is the one website I spend almost as much time at as I do our own website here.

Weaponsman.com

To use the owners words to help set the tone for the website.

“WeaponsMan is a blog about weapons. Primarily ground combat weapons, primarily small arms and man-portable crew-served weapons. The site owner is a former Special Forces weapons man (MOS 18B, before the 18 series, 11B with Skill Qualification Indicator of S), and you can expect any guest columnists to be similarly qualified.

Our focus is on weapons: their history, effects and employment. This is not your go-to place for gun laws or gun politics; other people have that covered.”

As you can read from the “about” blurb from the wesbsite, the eponymous weapons man is indeed more than qualified to talk about small arms.   Though it is a very rare day indeed when he is only talking about small arms, or larger weapons of all types  from those used in the heavens to below sea level and in between.   That is one of the many reasons I love the website.  He touches on a variety of topics, none of them ever boring.  A personal favorite being the “when guns are outlawed then only outlaws will have ….  toilets, chainsaw, defenestration etc etc , whatever was the cause of death in the news report being spotlighted. Point being to  give none stop evidence  of what we  already know.  Banning guns will not stop murder or  accidental death.
Weaponsman  AKA Hognose, of course has multiple  technical and historical posts  on a variety of weapons,  some rare and some well known  to the gun world.
Being constantly in the thick of tech gun info myself,  some of the other posts I enjoy the most are the ones where he talks about the Special Forces world and gives  tidbits from that world only a few will ever experience.  The USSF posts often range the full history of the Green Berets, often from Vietnam to more recent times.  best of all. there is no snobbery there. No elitism. No “stay in your lane” if you want to ask a question or make a comment ( as long as it is not idiocy of one variety or another of the many varieties) in the comment section.   The comment section itself full of wonderful knowledge and experience  from the regulars.  Some of those regulars being people you may and should already know like the irreplaceable Daniel Watters from the 5.56 timeline and fellows like Ian  from Inrange TV / Forgotten weapons not to mention any amount of SF people old and new.  And of course myself.
You may even run across articles and posts speaking about our work here ,as he reads looserounds which is very flattering.
If you only want the tech stuff there is plenty of that. All posts come with multiple sources and usually links to where to buy the books or free PDFs , and other means.   A sample from the Best of Weaponsman gun tech section below  copied from the website.
  • The SAWs that never WAS: Intro, and XM106. This introduces the series, and the ugly duckling of the competition, a bizarre M16A1 variant with quick-change barrel, but still magazine-fed. Published 28 Oct 13.
  • The SAWs that never WAS: Part 2, the XM-248′s forerunner, XM235. The Rodman Labs XM235 was a radical reconception of the light machine gun which was designed to increase accuracy and reduce unintended dispersion on target. We mention in passing its abandoned XM233 and 234 competitors, all chambered for a 6.0 x 45mm cartridge. Published 31 Oct 13.
  • The SAWs that never WAS: Part 3, XM248. Rodman couldn’t go to production, so the commercial makers of the XM233 and XM234, Philco and Maremont, competed for the contract. Philco (later Ford Aerospace) won, and began to make changes to the XM235, as requested by the Army, producing the XM248. Published 2 Nov 13.
  • The SAWS that Never WAS, part 3b: the feed of the XM248. The ratchet-driven sprocket belt feed of the XM235/248 is examined using the patent documents as a basis. Published 4 Nov 13.
  • The SAWs that never WAS: Part 4, H&K XM262. Heckler & Koch’s entry was initially just a baseline for comparison of the Army’s own designs, but it performed well enough to make it into the final four (with the 106, 248, and 249). Published 9 Nov 13.
  • The SAWs that never WAS, Part 5, XM249. Like the H&K XM262, the XM249 was initially just entered to compare the FN light machine gun to the Army entries, but it ultimately beat them all. Published 23 Nov 13.

If you like our page, I strongly recommend WeaponsMan, it is highly addictive and always entertaining with a high does of humor mixed with technical discussion.

This is the first website to be mentioned in this series because it stands above all others that will come.  It has my highest recommendation and I hope you go check it out and enjoy it as much as I do.

 

 

 

The Jericho 941: High Quality, With Quirks

My wife has a new gun. She wanted something metal. She wanted something that would be fun to shoot. She wanted something that would be interesting. We hunted interesting down, watched some Cowboy Bebop, and hopped on the internet. The Jericho was being re-imported once again by IWI, and after discussing the particulars of the Jericho with her, she was sold. She wanted Isreali Steel. I just hoped that when we plunked down the cash, the Isreali wunder nine would function and give her enough of a smile to enjoy shooting.

Let’s break it down:

IWI Jericho

The Jericho 941 is steel meets steel. It’s a heavy, big service pistol. It’s the type of gun you would want to hit someone with after exhausting all your ammo. Clean lines, excellent (or rather, peerless) machine work give us a pistol with incredibly smooth contours and lines. There are no machining marks, or rough edges. I am really impressed by the work in this piece. After researching the Jericho 941 and ordering sight unseen… I was a wee bit worried. Not so much anymore. The action is based on the CZ75 with an Isreali twist. It bears a familial resemblence, but the lines of the Jericho are much more industrial and flat. Like its relative, the action and slide of the Jericho sit tight inside the frame and as a side effect, reveal little of the slide itself for weapon manipulation. Unlike say, my square Glock which gives me lots of real estate for racking and manipulation, the Jericho gives much less purchase. Consider this a negative if forced to manipulate the weapon when wet or in slippery conditions. Oil carefully so that you don’t coat the slide in excessive slippery oil. Overall, the slide serrations work fine and once you have a normal grip on the pice, it slides back to the rear with little effort.

IWI Jericho Slide

Once you do get the slide back, you might also notice how smooth it is. Coming from the Tupperware generation of Glocks, I recall the first time I racked a Glock and was met by the scratchy, gritty feel of Gaston’s masterpiece. Once we got the Jericho home and I racked it back, I was jealous. The slide came back so buttery smooth that I instantly realized that IWI had quality in mind with the piece. There is no grit, no chrunch, just a smooth resistance until the barrel drops, which then is increased ever so slightly as the slide pushes the hammer down into the cocked position. Fantastic quality here folks, especially at $549 dollars.

IWI Jericho Review

The controls are ergonomic, but not ambidextrous. We have right handed controls incorporating a slide lever and safety made for a right handed shooter. A beavertail sticks out the rear to discourage slide bite. The full size service pistol frame fits my hands well, and I am a small-medium glove wearer. Smalls feel a bit tight, mediums a bit roomy. The Jericho’s controls were all reachable and capable of being activated with my hand size.

The trigger is a double / single action without a decocker. Meaning if you want this pistol in condition one, you have two options: drop the hammer with your thumb while pulling the trigger and hope you don’t slip, or option two: hammer back, round in chamber, safety on. Trigger pull itself is heavy and stiff much like every other double action I owned, but since the pistol will be primarily in single action mode (I am not willing to drop that little hammer on a live round, I like having a thumb) the single action mode was good to go. Single action is light, perhaps 3-4 lbs of trigger with a very short pull distance to the wall, and a smooth pull to the rear completes the hammer drop. A short reset with a tactile snap of sear engagement rounds out the single action package. I believe this gun permits you to run it fast based on the single action trigger characteristics.

IWI Jericho Slide lock

 

The sights are standard, front and rear driftable three dot sights. Night sights are available from Meprolight for upgrades down the road.

IWI Jericho Sights

In action, the gun had no major concerns from me. The heavy frame kept recoil down to a minimum and my wife, a first time pistol owner, had no trouble or fear from this gun’s recoil. It simply shoots without much fanfare. We cycled a 50 round box of Winchester 124 grain 9mm without issue. I was relieved that my wifes new pistol was functioning properly.

I had lots of my favorite brand of malfunctioning reloads handy, freedom munitions, to test as well. Having bought this stuff a year ago, I found that my G19 ate it like candy, while my G17 jammed like crazy with it. In my opinion, it is a weakly loaded ammo that I believe had difficulty cycling the heavier slide and new recoil spring of my G17. We threw some of this 115 grain 9mm through the Jericho and my Glock and both pistols choked at least once or twice a magazine… which gave me a chance to teach my wife how to clear malfunctions. At this time, another quirk became apparent; the flat, flush floorplate give us nothing to grab in order to strip a mag to clear a malfunction. Consider CZ75 magazine extensions to assist in clearance drills since the CZ75 and Jericho magazines are the compatible.

IWI Jericho Magazines
16 round steel magazines with a flush flooreplate. Needs a extension.

 

Past the crappy reloaded ammo, the gun started to loosen up, and was taken out again for a separate range session with one malfunction during my wife’s CCW course. She stripped the magazine and cleared the pistol, and had it back online for the next target rotation without issue. This singular malfunction was with factory new Winchester 115 grain white box. The ammo breakdown was thus: 50 rounds of 124 grain ammo without malfunction. 100 rounds of underpowered reloads which choked both the IWI and my G17, 25 rounds of aluminum cased budget ammo with no malfunctions, and 100 + – rounds of new 115 grain Winchester white box with one malfunction during a CCW course.

The pistol handled well, points well, and shoots well. Thus far it slings lead with precision and ejects brass consistently to the right. I believe the malfunctions at this point are ammo related. Most problems were failure to eject, telling me that the ammo just didn’t have the power to rock the slide back all the way to the rear. This gun likes ammo with a decent power factor, otherwise plinker ammo and weaker stuff is likely going to have a hard time cycling the heavy steel slide and stiff (new) recoil spring.

With a gun like the Jericho, expect less in the way of accessories than standard common sidearms, but luckily this pistol has been around for decades, and importers bring a variety of holsters and components over from Israel… but ultimately the options are somewhat limited in comparison to more common products.

Final impression: A little more testing is warranted to examine the pistol and different ammo types. Defensive quality ammo seems like it will be the hot ticket for reliability, and the overall weight and heft of this steel service pistol will keep the recoil impulse down. The controls are ergonomic for a right handed shooter, and the second stage of the trigger is light and clean. The first stage is long and hard to reach if you have small hands. The gun must be carried cocked and locked. This gun would be a excellent piece for home defense with some night sights and a light. A little big / heavy for carry  (2.3 lbs) but if your a OWB carry guy / gal and want a old fashioned steel piece, give it a try. I will report back on Looserounds if the pistol has any problems past the break in period, but I will be cycling 124 grain or higher 9mm through this pistol for the foreseeable future.

Spike.Spiegel.full.1725812
SEE YOU SPACE COWBOY…