SUREFIRE 60 round magazine

The Surefire magazines that hold 60 and 100 rounds have been out for a while now. If you are like me, you have read a few conflicting reports on the quality of the mags all over the internet.  With a possible panic buy situation looming in the future and my own curiosity I decided to try one out. I had no real use for the 100 round magazine since I am not a SAW gunner I opted for the 60 round mag. And as a side note it should be pointed out that surefire now sells MOLLE mag pouches that will hold the mags now.

Once I got the mag, I set out to test it as hard as I could. I loaded it completely full and inserted it into my carbine expecting it to feel like a boat anchor. I was greatly relieved to find that you can not really tell  it is 60 rounds. It really does not feel like any real extra weight. The balance of the weapon still has the same balance and handles just as well as it would with a 30 rounder.  The mag dropped free when empty and I felt no stiffness or friction when the mag release was pressed.  The mag was also very easy to seat  into the gun when loaded full and the bolt was closed. I thought with all the tension from that much ammo it would need some effort but it did not. Another nice discovery was that the 60th round was just as easy to thumb into the mag as the 1st round was. No sore bloody thumbs like was expecting. That was a very nice surprise.

The surefire is pretty much USGI in the feed lips department. The mag body is made from the same metal as the gov issue mags with what appears to be the same coatings. It is pretty simple to take the mag down for cleaning etc.

I went into the testing after all the usual examinations and fondling. I fired the mag empty in one go and it worked fine, locked the bolt open and dropped free while using M855. Next I dropped the ammo into the dirt, loaded them while dirty, shook them up in the mag and ran it dry with the same result.  Next I got into prone and put all the pressure I could on the mag using it as a monopod. I ran it empty with the same results.

I know some mags will give problems from the mag rest so I tested this a lot over two days. I fired another full mag while using it as a rest, but this time pushing it forward as I fired, rocking it forward. I reloaded it and did the same thing though this time I pulled back on it while pushing down hard. It worked great in both cases. I then did the same while holding the gun at an angle to the left then the right. I did both of these tests with a full mag. I did this thinking that some people  may have trouble shooting under a car and not touching the ground with the mag because of the longer length. In any case it did not matter. The mag ran fine with no problems. At this point I had put 400 rounds through the mag adn the gun. I had wiped off most of the lube from the colt to try to make it harder on the magazine. I also made sure to use stripper clips to laod as fast as I could so as to keep the gun hot and the mag warm and dirty. At this point I started using crummy ammo. I tried it with silver bear, brown bear, tula and wolf. Some of it was very under powered but, the mag worked fine. I would have been surprised to have any problems at that point, but I tried them just for the sake of trying them. And I am always looking for an excuse to shoot so it worked out nicely. Most of this testing was done today and a very windy and dusty place. My carbine was coated in a fairly thick coating of dust and I left the bolt open with mag in it to let dust in while shooting other guns to see if I could at least get the mag to feel gritty while working. No dice.

Now I will show a few pictures comparing the mag to a regular USGI and a Pmag and with and without ranger plates so people can get a idea of how long it is.

Here they are side by side. As can be seen, they are not to different in size. To the one guy who does not have a Pmag, they are slightly longer then a USGI.

I think this is a better shot to compare length with out the trick of the  curve of mags making them seem longer.

As can be seen in the picture. The surefire really is not too bad when you see its barely longer then a USGI with a magpul ranger plate on it. A lot of people use the pull tabs anyway, so when it comes to just plain length, it is really not all that much longer.

I know there is a lot of bad reports of the surefire all over the internet, but there is good as well. Mine has run great so far. I plan to test it a while longer before I say it is 100 percent ready to trust my life on it, or even a rifle match. But I am leaning toward that thinking currently. As much as i would like to say “buy with complete confidence” I must hang back. Though it worked great so far, it is not quite mature technology that has been proven enough in real combat in my mind. But, I am slow to jump all over something new. I usually want to see 5-10 years of something being used by the military or some other hard use  group and widespread adoption before I switch to something new. Especially if it is something really different. The surefire mag is not quite as big a deal as a new jet fighter or standard infantry round but, having a mag that fails you in a fight is a pretty big deal to anyone I think.  I will say it is worth buying and trying. if it works fine for you then that is great but take into consideration all the problems we are hearing. I have no way to prove how these supposed problems have happened or how  the mags were treated before they failed so keep in mind that most of the bad mouthing may be BS.  I will say I have heard a lot more good then bad. If you do want one but can not do it right now keep these things in mind.

Surefire will only improve it as time goes on an they will make any problem right. And there is a very very very good chance of wide spread panic buying and price hiking to come over the next few months and is a certainty if you know who is re elected.  So, my thinking was, if it works, great, I got it at a good price and if it give trouble, surefire will fix it and I will have gotten what at a good price before any chance, real or imagined for them to become hard to get, very high priced and sold out. I hope that at least helps you decide on to get one or not. I am very happy with mine and if it keeps performing as is, I will get another one for sure.

2 thoughts on “SUREFIRE 60 round magazine”

  1. do you use this thecnology to produce extended mags for 1911 ,45acp , I think for 15 or 20 rounds more compacts and easy to carry. that the same cualitie in aluminiun

  2. why not use the same technology to make extended mags for 1911,45acp,I thinkfor 15 or 20 rounds.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s